Underfloor Heating Thermostat | Electric Underfloor Heating Thermostats

The Heatmiser PRT-E underfloor heating thermostat was created with electric under floor heating in mind. This model has two different modes, the first mode (mode 0) is designed to work with a remote floor sensing probe, controlling only the floor temperature to any of four different comfort levels. The other mode (mode 1) works with both a remote floor sensing probe and either a built in air sensor or a remote air sensor. In mode 1, the thermostat maintains the air temperature and uses the floor sensor to prevent overheating.

Amazon customer review:

On the plus side:

- easy to fit
- attractive on the wall
- can be programmed to four different temperatures at different times of day
- fairly intuitive

Minuses:

- just the manual really, written in techno-speak and printed in mouse writing, but a pdf (bigger!) can be downloaded from the Heatmiser website.

On the customer care front, Heatmiser are most helpful, and responded to my enquiries promptly and helpfully.

Works with Flexel ceiling heating (not mentioned in Heatmiser blurb), and the floor probe can be disabled, leaving just the internal thermometer in the unit.

Technical Details:
Preferred Thermostat for Electric Underfloor Heating
Remote Sensor Included
Weekday / Weekend Programmable
Key Lock Feature
13A Switching Rating
Available in White, Silver, Brass
Compatible with all electric floor systems with a total load less than 16A
5/2 day or 7 day programming (selectable in software)
Temperature Hold Feature
Holiday Feature
°C / °F selectable
Self Learning Optimum Start on 1st and 3rd level
Keylock Facility
Frost protection with adjustable temperature setting
Remote Control Option (RM1)
16A Switch rating (3,680 watts)
Blue Backlight (turns off after 30 seconds)
Floor sensor included
Supply: 230v AC
Dimensions: 98×85x13mm
Weight: 195g

Comments are closed.